A sidewalk sign is ideal for environment outside your office, restaurant, or retail store. Exemplifying a double-sided, snap-open poster frame, this sidewalk sign will attract awareness from all angles. To load your sign frame with an appealing message, merely snap open the four edges, place your poster inside and snap shut! To maintain your posters and media content seeking fresh and new, the sidewalk sign also incorporates a non-glare protective lens. Please note that while the snap frames and lens work to seal out moisture, your posters may become damaged if utilized in extremely harsh circumstances for example heavy rain and snowstorms.
This sidewalk sign, also also known as a curb sign, is an ideal method to attract awareness from the street and lure clients into your store! Engineered especially for outdoor use, this sidewalk sign is produced from sturdy materials for a steadfast and long-lasting construction. The heavy-duty, molded plastic base incorporates a screw-in cap and can be filled with water or sand for weight and support. Holding close to 7 gallons of water, this base weighs over 65lbs when filled! This will keep your curb sign steady, and minimize the chances of it blowing over in the wind. Engineered-in wheels also make your sidewalk display easy to uproot from environment to environment as needed. To further embellish the stability of these display, this sidewalk sign incorporates sturdy springs to lower the effectualness of wind.
A-Frame signs are foldable signs typically used for sidewalk advertising by retail businesses and others that rely on foot traffic. One or both sides of the “A-Frame” can have a graphic or advertisement. The signs can be used indoors and outdoors. When used for the latter, the frame itself can be filled with sand or water to provide extra weight for stability.
A-Frame signs, sandwich signs, or sandwich board signs are, for all intents and purposes, the same thing. All three terms can be used interchangeably. These terms refer to a foldable sign most commonly used on sidewalks outside retail stores. While the terms are interchangeable, the frames of these signs can be plastic (like ours), wood or even metal. Further, graphics/signs can be adhered via Velcro, adhesive, or very rarely slid into the frame itself. Our signs, whether called A-Frame or sandwich board, are of the plastic variety and the graphic, depending on which you choose, is either an adhesive decal or changeable corrugated plastic graphic held in place by tabs.
Yes! Our A-Frame signs can be used outside year-round. The frame itself is made of heavy-duty plastic that is 1.5” thick on each side, for a total of 3” thick. Additionally, the frame can be filled with sand or water to provide stability for the sign. Each side of the frame can hold an additional 5 lbs. of sand or water. We do not recommend using water during sub-freezing temperatures to avoid the expansion and cracking of the sign. Lastly, the adhesive decal graphic option will be covered with laminate to provide durability while the corrugated plastic graphic is also covered with laminate and can easily be removed and swapped out for another graphic if needed. We would recommend not using the sign during serious precipitation or severe weather.
With no water or sand inside the frame, it weighs only 18 pounds. This weight ensures a long-lasting sign but is also light enough to be easily repositioned and/or stored as needed.
All of our sandwich board signs are double-sided. If you want the same graphic on both sides, simply add one design and checkout and we’ll automatically put the graphic on both sides of the A-Frame. If you want a different graphic on one side, simply select the option for "Two Sides Different" and then click the “Back Side” button on the design tool and design it as you wish. We’ll then make sure each side displays its respective designs.
We offer two different graphic options for your custom A-Frame signs.
If you choose to go with the Standard Frame, your graphics will be made of 4mm corrugated plastic that will be attached to the frame through the use of adhesive velcro strips. This allows you to remove and replace the graphics on your A-Frame as needed.
If you go with one of our Premium Frames, they will come with 4mm corrugated plastic “inserts” that slide into the indented area of the A-Frame. Tabs on either side of this area slide over the top of your graphics to hold them firmly in place. The obvious advantage of using this type of A-Frame sign is the ability to regularly swap out graphics as sales, seasons or marketing messages change.
Yes. The adhesive graphic(s) option will be covered by a matte laminate to help protect it against elements when used outside as well as unintentional scratching, rubbing, etc. The removable corrugated plastic graphic option can easily be removed and changed out if desired. It is also covered by a very thin laminate to protect it. Nonetheless, it is intended that these signs are to be used outdoors in all situations except severe weather of any type.
The actual sign area for your custom graphic is 24” wide by 36” high. This area and the sandwich board sign itself (25” wide x 45” high) is not customizable.
We currently only offer the standard 25”x45” sandwich board sign.
The graphic area for both types of A-Frame signs will always be 24” wide by 36” high. However, for the Standard white A-Frame sign, the parts of your design that you leave white will end up blending in fairly well with the frame. Therefore, you can make your design whatever shape you’d like within that 24”x36” area and it will give the appearance of being a smaller graphic or cut to shape. The best-looking sign will still be one that uses a full 24”x36” graphic. Please note that this is not possible on the Premium A-Frame Signs. The corrugated plastic graphic needs to be exactly 24”x36” in order for the graphic to work properly with the frames.
No. We currently do not offer either chalk or dry erase-based options for your custom A-Frame sign. If you are interested in these products please contact us so we can offer these in the future!
Currently, we only offer the heavy-duty plastic A-Frame sign as seen on this page. We’ve found this to be the best all-around A-Frame sign due to its durability, ease of use, and ability to be a double-sided sign with large graphics. Many of the alternatives are disappointing in terms of performance (cheap/thin metal or wooden frames) or a hassle to use. We do hope to offer similarly durable A-Frame signs that feature chalkboard and dry erase functionality in the future.
Currently, we offer only the white plastic sandwich board signs for the laminated adhesive graphic. These are referred to as our “Standard” A-Frame signs. The corrugated plastic graphic A-Frame sign can either be a white or black plastic frame. These are referred to as our “Premium” A-Frame signs. Though either of the signs allows you to fully customize the color of your image and the messaging for your sign on the graphics themselves.
Our sandwich board signs should last at least 5+ years whether used outside or inside as long as they are cared for properly. In many cases, this lifespan is significantly longer, but will depend largely on what kind of constant conditions it is used in and the care of the frame/graphics.
No. As pictured on this page there are no wheels on the bottom. It does have a molded handle at the top of the frame for easy carrying and positioning. We’ve found that an A-Frame with no wheels is more likely to remain stable while the handle still provides easy storing and moving.
No. We print all of our signs in full color. So, no matter how many colors your sign(s) may have, your cost will not go up. Your cost will be determined by the quantity you order, the shipping options you choose as well as any applicable taxes.
No. We have a wide range of templates available for you to use or start your design with. Alternatively, you can contact us to take advantage of free design services from one of our professional designers or upload your file(s) to our design tool to create your custom A-Frame signs.
No. At the current time, we only offer the sandwich boards on this page as described. Each side has a regressed sign graphic area for your sign to feature either the adhesive decal or corrugated plastic insert. The double-sided functionality offsets the need for a rotating or swinging aspect of the sign. Through years of experience, feedback from our customers, and our own use, the sign we offer has proven to be far more durable and just as effective.
We do not currently offer changeable letter signs in either the sandwich board variety or otherwise. We would recommend a chalkboard or dry erase alternative in the case the messaging needs to change frequently.
No. With either option, the sign comes ready to use with your graphics already installed in the sign. Simply unfold the sign, decide whether you need to ballast it with sand or water and then set it and forget it.
If you select the adhesive decal the only way to change the graphic is to put another adhesive decal over the top of the original. If done well there is no noticeable indication that an older graphic was used. With the corrugated plastic graphics, you can switch your signs out as often as you’d like assuming you have alternative signs that are the proper size and material.
Yes. Our A-Frame signs are built to withstand both exterior and interior use. In many cases, the frame and graphics will do just fine regardless of where you might be located. We do however recommend that you avoid using your sign outside during extreme weather, particularly high winds, heavy rain and sustained cold temperatures.
Our sandwich board signs can be filled with water or sand to provide stability in these situations. Use of either of these options should ensure the sign stays upright and visible to your potential customers. We do not recommend using water when there is danger of sub-freezing temperatures due to potential for the ice to expand and crack the sign frame.
No. While those signs are sometimes also called sandwich signs, our signs are not intended to be put on a person to become a walking advertisement. Whether for an event, on a sidewalk outside a business, or a restaurant, our signs are designed to be stable and stationary!
The plastic frame itself does have the potential to have scuffs or scratches if not handled well or from falling over while positioned on rough surfaces such as concrete or pavement.
With the exception of an extremely prolonged period of sun exposure, there shouldn’t be any fading or discoloration of the frame. Similarly, splintering and rusting should not be a problem due to the fact that it is made from heavy-duty plastic.
Likewise, with the exception of expanded ice causing the sign to warp or crack, the frame should not have problems with warping or cracking. Overall, the frame itself is incredibly durable. We’ve seen these frames last for 5+ years with proper care despite regular use outdoors.
The most common and intended use for sandwich board signs is sidewalk advertising for retail shops, restaurants and other businesses with a storefront and the potential to push foot traffic into a physical location. The actual graphics themselves can be used for sales and promotions, daily menu changes and many other purposes when used on a sidewalk.
Beyond being used for sidewalk advertising, these signs are great for events and conferences for traffic control, check in and registration tables, parking, as well as directing attendees. They can also be used as a point of purchase signage and even to warn or caution for temporarily dangerous or restricted areas.
Yes! Our A-Frame signs are extremely durable and can be used repeatedly. Simply store them as per the instructions below and you should have no problem using these signs again and again.
Installation of our A-Frame signs is as simple as carrying it to the desired location and unfolding it. With weather resistant graphics that are adhered via an adhesive backing (Standard version) or corrugated plastic inserts (Premium version), setting up your sign is as easy as unfolding a folding chair. For windy or other inclement weather, the frame can be filled with sand or water for extra stability.
Storing your custom sandwich sign is as easy as setting it up. Simply fold it up or collapse it and store it in a dry location. We would recommend storing it in the upright position but they can just as easily be stored lying down. The upright position also allows for use of the stacking lugs which are part of the frame’s custom design. These lugs will help interlock multiple frames stored upright to prevent movement that could damage the graphics on the sign frames. If storing them lying down, be aware of placing anything on top of the graphic area of the sign so as to not damage the actual graphics of the sign. This is particularly true if you leave the corrugated plastic version of the graphic in the sign while storing.
Our A-Frame signs are incredibly durable and designed to be used outdoors. Nonetheless, storing them indoors before any extreme weather will preserve your sign for repeated use over the course of many years. Regular washing of our Standard and Premium signs using a non-abrasive cloth with very mild dish soap can help keep your sandwich board and graphic looking clean and vibrant.
The only ongoing maintenance that may be needed is to wipe down the plastic frame of the sign with a wet non-abrasive rag to keep it clean. You can also do the same for either graphic because there is a laminate over top of each of them. When wiping down the graphic(s) do not use a soaking wet rag but rather a slightly damp one so as to ensure that no moisture will get underneath the laminate.
Finally and as noted elsewhere, we recommend taking down and storing your sign if extreme weather conditions are imminent. Extreme weather and any kind of intentional efforts to damage the frame could result in a sandwich board sign that is permanently damaged.